The use of spectroscopic analysis, particularly UV spectrophotometer, is a simple and essential technique for bulk drug estimation, formulation studies, and compatibility assessments of drugs with various excipients. In the pharmaceutical industry, various analytical instruments, including Fourier transform infrared spectroscopy (FTIR), are employed for investigating drug-excipient interactions that can impact the stability of active pharmaceutical ingredients. This study aimed to develop a UV spectrophotometric method for the analysis of Pioglitazone hydrochloride in phosphate buffer (pH 7.4) and methanolic solution, assessing its linearity and compliance with Beer's Law. Furthermore, we aimed to use FTIR to characterize potential interactions between Pioglitazone and common pharmaceutical excipients, such as Guar Gum, Chitosan, and Sodium Alginate. Standard solutions of Pioglitazone were prepared in phosphate buffer (pH 7.4) and methanol. UV spectrophotometer was conducted to determine the maximum absorption wavelength. Calibration curves were constructed to evaluate linearity and adherence to Beer's Law. FTIR analyses were performed to investigate drug-excipient interactions by examining the functional groups. In phosphate buffer (pH 7.4), the maximum absorption wavelength for Pioglitazone hydrochloride was 268 nm. The calibration curve for Pioglitazone in phosphate buffer (pH 7.4) demonstrated linearity in the concentration range of 1–20 μg/ml, with a correlation coefficient of 0.998. In methanol, the maximum absorption wavelength for Pioglitazone hydrochloride was found to be 272 nm. The calibration curve in methanol exhibited linearity in the range of 1–20 μg/ml, with a correlation coefficient of 0.999. FTIR analysis revealed potential drug-excipient interactions, particularly in the case of Guar Gum, Chitosan, and Sodium Alginate, suggesting the formation of stable hydrogen bonds. The developed UV spectrophotometric method for Pioglitazone analysis is a reliable, cost- effective, and reproducible approach, making it a valuable tool for drug development and quality control. Additionally, the FTIR characterization confirmed interactions between Pioglitazone and common pharmaceutical excipients, enhancing our understanding of formulation compatibility,

Archana mehrotra

Ultraviolet (UV) disinfection technologies are well-known tools for microbial prevention in indoor public places which are frequently employed for disinfecting air, surfaces, and water. Such technologies have drawn a great deal of interest due to its potential application, especially in the domain of healthcare. This article discusses the shortcomings of chemical disinfectants and analyzes the current research standing on the development of various types of UV disinfection technologies for their prospective usage in the healthcare industry. Furthermore, the article provides a thorough analysis and in-depth evaluation of the current antibacterial studies using UV lamps and light-emitting diodes (LEDs) for the treatment of frequently encountered pathogens associated with healthcare. According to the systematic review, UV-LEDs have shown to be a potential source for delivering disinfection which is equally efficient or more effective than traditionally used UV lamps. The findings also provide valuable considerations for potentially substituting conventional lamps with LEDs that would be less expensive, more efficient, more robust, non-fragile and safer. With greater effectiveness and advantages, UV-LEDs have shown to be the potential UV source that could fundamentally be able to transform the disinfection industry. Therefore, the study supports the employment of UV-LED technology as a better and workable approach for effective disinfection applications. The study also offers insightful information that will help to direct future studies in the domain of hygienic practices used in healthcare facilities.

Jahanzeb

There is a close relationship between a marketing strategy and its ability to realise its mission, vision, and business strategy. A case in point is the Nike brand that focuses on creating meaningful stories for its loyal fan base. It achieves this by inducing emotions into the customer base through "emotional branding" to realise its vision of expanding human potential by creating groundbreaking sports innovations. Nike's marketing campaign strategy involves building meaningful stories and tag lines using a traditional narrative of a hero who overcomes every challenge brought forth through its slogan of "Just Do It." The brand also has a distribution strategy of using subsidiaries like Converse, Jordan, and Hurley and channels like retailers, e-commerce, and supermarkets to reach out to millions of its customers (Mahdi, Abbas, Mazar, & George, 2015). To achieve its mission of bringing innovation and inspiration to every athlete globally, the brand has invested in top-notch technologies like hyper-adapt as part of a marketing strategy.

Zamzam abdelazim

Ever-growing era of mobile and personal wireless networks, motivated research in several fields of engineering resulted in low power and low cost consumer products. The voice band processing required in mobile applications demand for architectures, which can easily be integrated in single chip SoC applications. The conventional approach is to have a dedicated IC outside the digital ICs to perform analog to digital conversion. The motivation of single chip radios demand for integration of such ADC modules on digital cellular related ICs. Mixed signal design is very challenging and hence usually it is preferred to have separate ADC chip before the ASIC/FPGA. In this paper we present a digital sigma delta ADC architecture, which can perfectly be integrated in any digital IC with a targeted sampling rate of 20 kS/s with more than 80 dB dynamic range.

P.a. harsha vardhini

The prevalence of PMS (prevalence of pre most common disorder among the women’s. It has high impact on women’s health, emotions and behaviours during certain days of menstrual cycle. Aim: To determine the symptoms of PMS. Material and methods: PMS.The sampling frame is comprised individual aged 18 was used. Then respondents were given information regarding benefits of jaggery tea consumption to over PMS. Preparation of jaggery tea: add the one cup of water for boiling, and then add the requirement amount jaggery. Add filter to discard the solids. Study subjects were asked to consume jaggery tea five days prior and after the date of menstrual cycle continuously for 3 months. Study subjects were ask premenstrual syndrome screening toll before and after jaggery tea consumption. The data was analysed using descriptive statistics and effect of jaggery tea was evaluated using paired t Result: from PMS, 120(61.5%) of them had mild PMS, 55(28.2%) had moderate PMS and only few 20(10.3%) of then had sever PMS. Conclusion: role in curing PMS

Shwetha hitnal

During the last two decades, the concept of Fibre Metal Laminates (FMLs) has been evolved to find solution to the requirement of improving mechanical properties and reducing structural weight of elemental components of aircraft structures. In this work FML is prepared using Al 2024 by placing alternately with glass/carbon/aramid Fibres. From experimental results of FML shows greater advantage in mechanical properties then aluminium monolithic layer and this composite fibre laminates individual. The FMLs tested in this work were made of 3 layers of 2024 T3 aluminium alloy 0.28 mm thickness and fibre mats. The 5-3/2 laminates of size 300x300 mm with 3 mm thick were prepared using Vacuum Assisted Resin Transfer Moulding (VARTM) in cold compaction and test specimen were cut by using abrasive water jet machining as per ASTM Standards. The adhesion between fibre and metal layer will play a major role in strength of FML. By keeping this in consideration FMLs were prepared without blow holes and capable of withstanding delamination while preparing specimens through water jet and during various tests employed. The fracture surfaces of destructed specimens are studied with help Scanning Electron Microscope (SEM) image. Similarly, the numerical simulation of all the tests were done using Ansys APDL 10.0 Software. It is observed that aramid FML have substantially stronger in longitudinal directions. Hence, more priority given in this paper to investigate tensile strength and fatigue life of aramid FML.

Boopathy govindarajan

This study presents a comprehensive bibliometric analysis of household consumption research in Maharashtra from 2017 to 2023, highlighting shifts in academic focus before and after the COVID-19 pandemic. The analysis explores key research trends, including foundational theories like the Keynesian consumption function and Engel’s law, while examining how themes such as income-consumption relationships, inequality, and economic resilience have evolved. Through citation network analysis, publication trends, and thematic evolution, we identify the most influential works, authors, and institutions that have shaped this field. Pre-pandemic research centered on established economic concepts, exploring factors like income distribution, economic growth, and household debt as predictors of consumption. However, post-2020, there is a marked shift towards understanding financial resilience, the impact of income shocks, and the role of government interventions in stabilizing consumption patterns during crises. This transition reflects an adaptation of traditional consumption models to account for pandemic-induced economic disruptions, emphasizing financial literacy and digital transformation as critical areas of study. Our findings contribute to a deeper understanding of the drivers of household consumption research in Maharashtra, providing insights into the socio-economic factors that influence spending behaviors in both stable and volatile conditions

Nandini jagannarayan

Crude methanol extracts of the leaves of Adenanthera pavonina L., Peltoforum roxburghii L, Prosopis cineraria L., and Prosopis juliflora DC., were evaluated for anti-emetic activity. Emesis was induced by the oral administration of copper sulphate 50mg/kg body weight to male chicks of four days age. The anti-emetic activity was determined by calculating the mean decrease in number of retching in contrast with those of control. All extracts (150 mg / kg body weight orally) showed anti-emetic activity when compared with standard drug Chlorpromazine at the same dose. Among all the extracts, Prosopis juliflora showed the highest (73.64%) and Adenanthera pavonina showed the lowest (50.17%) anti-emetic activity

Dr. salman ahmed

Creativity is regarded as one of the most complex of human behaviors. It can be influenced by a wide array of social, developmental and educational experience that leads to creativity in different ways in a variety of fields (Runco & Sakamoto, 1999). Opinions about the origin of creativity vary, and none of them explains the creative process completely. Creativity can be seen as the following: a divine quality, serendipitous activity, ‘planned luck’, endurance and ‘method’ (Cook, 1998a: p.6). Petrowski (2000: p.305) stated that “creativity research belongs to the baby-boom generation, beginning in earnest when Guilford directed the American Psychological Association in his 1950 presidential address to focus on this important but neglected area”. The existence of creativity as a modern term emerged from the results of the pioneering efforts of Guilford (1950) and Torrance (1962, 1974). Guilford and Torrance were psychometric theorists and they attempted to measure creativity from a psychometric viewpoint (Sternberg, 2006).

Mukhles m. al-ababneh

Cardiovascular disease (CVD) remains the leading reason of death among patients with diabetes mellitus (DM). Individuals with DM have a two to five time's greater risk of developing CVD than non-DM. Unfortunately, little data exists on Libya's prevalence and characteristics of cardiovascular risk factors. This study aimed to evaluate the cardiovascular risk factors and to assess their control among patients with type 2 DM (T2DM). All the patients with T2DM who attended the outpatient clinic at National Diabetes Hospital from September 2013 to April 2022 were interviewed and examined and included in this study. Demographical data age, smoking habit, body mass index measure, drug intake, history of previous cardiovascular events, blood pressure and fasting lipid profile were all recorded. 1049 patients have completed the study with a mean age of 54.06 ± 14.5 years old (females represented 68.0% of the studied sample size), there were different duration of diabetes between the studied sample, varying from newly diagnosed patients (n = 265, 25.2%) and above ten years of diabetes duration patients (n = 488, 46.5%). Active smoking in 129 patients (12.3%), the bodyweight of studied patients ranged from 44.0 Kg to 186 Kg (85.65 ± 1.73), 820 of the patients had uncontrolled body weight (78.85%). Uncontrolled blood pressure, even with treatment, was found in 304 patients (29.0%), uncontrolled dyslipidaemia in 45 patients (04.3%), and uncontrolled hyperglycaemia in 816 patients (77.9%). Established CVD was positive in 295 patients (28.2%), maximum age group was in 54 - 74 years (n = 516, 49.3%). The most typical age group with multiple (more than three) CVD risk factors was 54 - 74 years of age, were female patients with more than ten years of history of diabetes, uncontrolled hyperglycemia (HBA1c > 10%), uncontrolled body weight, uncontrolled blood pressure and dyslipidemia. Thus, the present data indicated that Libyan patients with diabetes mellitus have high CVD risk factors. Even in patients with previous events, these uncontrolled risk factors elevate the likelihood of repeated cardiovascular events. Patients with diabetes mellitus necessitate a more aggressive approach to control the modified risk factors such as hypertension, dyslipidemia, obesity and smoking.

Mediterranean journal of pharmacy and pharmaceutical sciences

The soil samples were collected from Melia dubia plantations in two different locations in Tamil Nadu. A total of twenty five actinomycetes isolates were isolated and they were screened for melanin pigment production using different culture media. Only two isolates were able to produce melanin pigment under in vitro study and one isolate showed positive reaction to L-tyrosine substrate. Based on morphological and bio-chemical characters the isolate was identified as Streptomyces sp. The DNA of the isolate was isolated and its 16S rDNA gene was amplified and sequenced. The phylogenetic analysis of Streptomyces puniciscabiei was carried out.

Dr. saranya devi k

Before the start of the SARS-CoV-2 (COVID-19) pandemic, the whole environment around us had been deemed very toxic to breathe in due to the amount of greenhouse gases that had been emitted over the centuries. The Earth faced rising temperatures, which in turn led to the melting of glaciers and rising of sea levels. Environmental degradation was happening fast due to the depletion of resources such as air, water and soil. But after the coronavirus lockdown (Talabandi) commenced, there have been changes in the environment. The lockdown still has a huge impact on people in India too. The halt of industrial production and traffic resulted in cleaner air and rivers. In India the first phase of the nationwide lockdown that began on March 24 followed by enforcement of a series of regulations had some evidences that the COVID-19 curve is flattening in the country's COVID-19 affected regions. There was a good chance Prime Minister Narendra Modi extended the lockdown (Talabandi) four times that ended on (Phase 1 (24 March-14 April)., Phase 2 (15 April-3 May)., Phase 3 (4 May-17 May) & Phase 4 (18 May-31 May). The paper focuses on different aspects of environmental impact due to SARS-CoV-2 in India.

Rina kumari

The conservation of traditional medicinal knowledge opens the door towards modern aspects of herbal drug discovery. It started with knowledge exchange through ethnic groups through oral tradition and then in the documented form. Herbaria conserving identified and authenticated plants for future correspondence play an important role. In presenting the review, the authors have declared different auxiliary aspects of herbaria for phytomedicinal research.

Dr. salman ahmed

Introduction: Mental illness is a global issue that affects various population groups, including university students. Gaining insights into students' perspectives on mental illness plays a vital role in fostering mental health awareness and combating stigma in educational environments Purpose: The present study aimed to investigate Vietnamese undergraduate students’ knowledge, perceptions, and attitudes of mental illness by focusing on the dimensions: (i) the level of knowledge students possess about the causes and manifestations of mental illness, and (ii) their attitudes towards individuals experiencing mental health problems. Methodology: Using a descriptive cross-sectional design, this study involved 350 undergraduate students from five universities in Ho Chi Minh City, Vietnam. Data collection was conducted between June and July 2024 and utilized the Perception Towards Persons with Mental Illness (PWMI) Scale adapted from previous studies. Data analysis was performed using the Statistical Package for Social Science software, version 25 (IBM SPSS, Chicago, IL, USA). Results: The results indicated that approximately 80.6% knew about mental illness, and 70.5% perceived mental illness as a common or quite common phenomenon in Vietnam. Regarding the etiology of mental illness, a significant majority identified "bad things happening to you" as a cause (73.3%), followed by substance abuse (51.4%) and brain disease (50.0%). The findings also revealed that, despite some positive perceptions and attitudes, many responses clustered around the neutral option, particularly for controversial or personal items. Conclusions: The findings of this study underscore the need for targeted educational interventions to foster more informed and compassionate attitudes towards individuals with mental illness among undergraduate students.

Le minh tien

The orientation he/she chooses has a bearing on his/her long-term success. This orientation is known as your "locus of control." Its study dates back to the 1960s, with Julian Rotter's investigation into how people's behaviours and attitudes affected the outcomes of their lives. Locus of control has been defined as the degree to which an individual perceives having control over the environment (Rotter, 1966). According to Rotter (1975), there are two types of control, internal and external, which anchor a continuum that approximates a normal distribution. People are said to have an internal locus of control when they believe reinforcements are contingent upon their own behaviour or stable personal characteristics. External locus of control results when people believe that reinforcements are due to luck, fate, or powerful others outside of their control. Current study focuses on investigating the influence of demographic variables (age, gender, education level), marital status and socio economic status (occupation, income) on the level of internal/ external locus of control with the help of data collected from residents (aged between 20 and 50) of a select suburbs in Mumbai city. On analysing the data so collected, it is found that age has a major influence on an individual’s level of internal locus of control.

Nandini

Antimicrobial resistance poses a critical threat to global health, exacerbated by inappropriate antibiotic usage. This study evaluates antibiotic consumption at Hospital 199, a public security hospital in Vietnam, using the defined daily dose per 100 bed-days and the World Health Organization AWaRe classification framework. Data were collected retrospectively from inpatient departments over 2022, analyzing prescribing trends to assess stewardship effectiveness and identify areas for improvement. The findings reveal a total antibiotic usage rate of 60.8 defined daily dose per 100 bed-days, predominantly driven by watch antibiotics (63.8%), followed by access antibiotics (36.2%), and minimal use of reserve antibiotics (0.0003%). Critical care departments, such as anesthesiology and intensive care, reported the highest consumption (190.54 DDD/100 bed-days), which may reflect the complexity of care provided and potential empirical prescribing practices, or an elevated infectious burden. β-lactam antibiotics accounted for 59.4% of total use, with third-generation cephalosporins representing the largest subgroup at 40.2% of defined daily doses. While adherence to stewardship principles was evident in the limited use of reserve antibiotics, the reliance on broad-spectrum agents highlighted systemic challenges, including empirical prescribing practices and limited diagnostic capacity. This study highlights the need for targeted interventions to promote access to antibiotics, reduce over-reliance on watch agents, and enhance diagnostic support. By aligning local practices with World Health Organization guidelines, Hospital 199 demonstrates its potential to combat antimicrobial resistance effectively. These findings offer insights for similar low- and middle-income settings, contributing to global efforts to mitigate resistance and optimize antibiotic stewardship.

Mediterranean journal of pharmacy and pharmaceutical sciences

The threshing quality of the machine was affected by moisture content. This parameter was one of the main causes of production losses. In Ethiopia, this problem was highly observed in the farm area during threshing. Therefore, the main aim of this research was, to minimize production losses during threshing by reducing the effect of moisture content on the crop, to improve threshing capacity, threshing and cleaning efficiency, to reduces fuel consumption, and to minimize grain damage by the machine during threshing. The experiment was done at four-time replication in the moisture level of 14%, 18%, and 22% for three selected cereal crops (barley, wheat, and tef) with a completely randomized design (RCBD) and 4 replicates as-block giving 12 total experimental units. Crop moisture content, size of the grain, sphericity, angle of repose, density, thousand-grain mass and coefficient of friction as well as threshing capacity, threshing efficiency, cleaning efficiency, germination rate, fuel consumption, and grain breakages were the parameters used to evaluate the performance of the thresher. Threshing capacity, threshing and cleaning efficiency, and density of grains showed decreased, as moisture content of crops increased. The other parameters mentioned above were increased with moisture content. A combined mean analysis of variances on the performance of thresher was significant at (p 0.05). The recommended amount of moisture content in this study was 14% because the result obtained by 14% moisture level was preferable to other moisture levels. At 14% of moisture content, the threshing capacity was (208.750, 285.45 and 68.181) kg/hr, threshing, and cleaning efficiency (%) were (98.603, 99.330 and 99.49 and 97.101, 98.22 and 93.731 respectively). Percentage of germination rate was (94.25, 94.50, and 91.25) and the amount of fuel consumption was also (1.14, 1.72, 1.70) l/hr., for barley, wheat, and tef crops respectively.

Dessye

The Cellular Manufacturing is adopted in batch type manufacturing industries nowadays for their production with increased productivity, less cost and time with effective control. The proposed optimization model is used to determine the cost of machine cells, i.e., machine duplication, part subcontract, inter intra cellular movements cost and cost of production associated with machine cell, such as machine reconfiguration and part inventory considering machine flexibility for various time periods. Initially, mathematical model is proposed to calculate machine cell cost with and without considering machine flexibility and then another lpp integer model is proposed to calculate the machine cell production and associated cost for the changes in time period, part type and volume considering machine flexibility. The manufacturing data in the incidence matrix and machine cell, part family data in the block diagonal form are given as input to the optimization programming language Cplex and the output are given for the two mathematical models. The data related to machine duplication, part subcontract, inter intra cellular movement; machine reconfiguration and part inventory are given. Two dimensional shop floor layouts are presented in rectilinear coordinates for all the problems for easy analysis of material movement length and shop floor area

S ramesh

Colon is part of the digestive system in the human body responsible for absorbing water and nutrients from food residues. There are many problems affecting the colon including irritable bowel syndrome, constipation, hemorrhoids, anal fissures, abscess, colitis and colon cancer which considered one of the most common diseases among the Libyan community. The aim of this study was to search the presence of colonic disease and the tendency of those diseases to transform into colonic cancer at Benghazi medical center in Benghazi-Libya. A survey was comprised of 15 questions concerning colon diseases, proper diagnosis and treatment type. The survey was distributed to the physician specialized in medicine at Benghazi medical center and they fill it voluntary. The initial part of the questionnaire designed to obtain demographic data concerning the physicians who diagnose the colon illness. The rest part of the questionnaire was concerning special questions to define frequency of the diagnosed disease. There were 20 participants at this study. The response to all questionnaires were collected and analyzed for drug use, patients and disease distribution. In conclusion, this study demonstrates that the correct diagnosis, prescribing the appropriate treatment for the colon disease and using the medicine properly is one of the most important things that help in treating the disease and reducing its exacerbation. In some cases, eradication procedures may be required if the medicine is not sufficient to treat the disease without the need for operations

Mediterranean journal of pharmacy and pharmaceutical sciences

Mentoring relationships between a senior, experienced faculty member and a junior employee, between a faculty member and an undergraduate or graduate student, or between a senior and a junior student is essential in higher education. The current review aims to emphasize the necessity of establishing organized mentorship programs at national institutions to enhance academic performance, teaching/learning effectiveness, knowledge and skill development, growth and development, research productivity, and community engagement. The mentor and mentee both benefit from the mentoring relationship. Academic advising, preceptor supervision, and supervision of graduation projects are different from the mentoring relationship as they focus on only one aspect of the relationship, whether it is the study plan, the study session, or the project, respectively. Mentoring is a mutually beneficial relationship that calls for integrity, decency, self-assurance, trust, and respect. Educational institutes and colleges should set up a committee to establish a well-organized mentoring program with all the necessary templates for recruiting mentors and mentees, and also for annual evaluation and feedback from all parties involved.

Mediterranean journal of pharmacy and pharmaceutical sciences